HELP, E680i telnet fail under Linux

[lmxctds]

My E680i cannot telnet under Linux, but it is ok under Win2k.
I have configured usb0 successfully and disabled the firewall.

# ifconfig usb0
usb0 Link encap:Ethernet HWaddr 1E:49:53:34:C3:AB
inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::1c49:53ff:fe34:c3ab/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:504 (504.0 b)

# telnet 192.168.1.2
Trying 192.168.1.2...
telnet: connect to address 192.168.1.2: No route to host
telnet: Unable to connect to remote host: No route to host

I do not know whether it is right? My Linux is RedHat AS4, 2.6.9

Sorry for my poor English, Thank you much for any reply.

[ycyas]

hmm.. so far i know you need the kernel 2.6.12 version or higher to telnet in the e680i.

[dionua]

route add 192.168.1.2 dev usb0

[lmxctds]

Think you very much, I have resolved the problem.

[ycyas]

cool Telnet and SMB are working now on my suse 10.0 with this.
i have the e680i flashed with USB-Lan integratet.

#modprobe usbnet
OK

#ifconfig usb0 192.168.1.1 up
OK

#route add 192.168.1.2 dev usb0
OK

#ifconfig usb0
usb0 Link encap:Ethernet HWaddr 1A:41:6E:59:C3:63
inet addr:192.168.1.1 Bcast:196.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::1841:6eff:fe59:c363/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:8 errors:0 dropped:0 overruns:0 frame:0
TX packets:428 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:256 (256.0 b) TX bytes:48293 (47.1 Kb)



# telnet 192.168.1.2
Trying 192.168.1.2...
Connected to 192.168.1.2.
Escape character is '^]'.

MontaVista Linux Consumer Electronics Edition 3.0
Linux/armv5tel 2.4.20_mvlcee30-mainstone


(none) login: root
Linux 192.168.1.11 2.4.20_mvlcee30-mainstone #7 Fri Feb 13 15:39:51 CST 2004 armv5tel unknown

MontaVista Linux Consumer Electronics Edition 3.0

\[\033[01;34m\]\W \$ \[\033[00m\]



#smb://192.168.1.2/system
(shows the e680i system-files in the file-browser(konqueror)).

#smb://192.168.1.2/.home
(shows the e680i home-files in the file-browser(konqueror)).

[ycyas]

i have another laptop computer with ubuntu linux and tried to use Telnet to my e680i, it works so far but very slow and on the SD card i can not see the files. ubuntu just tells that it can not show all files from the SD card to the ubuntu file manager. really there does not show anything.

i can see the files from the interntal e680i memory but not from the card.

on suse 10.0 i do not have this problem.

[andrei_syah]

yeah SUSE is the best ....
i've been using dual boot XP + SUSE 10.2....

[luks]

today i'm trying suse 10.1...
then i followed the above guide to connect the e680i...
it was success to telnet but while i typed smb://192.168.1.2/system inthe address bar of konqueror there's nothing shown ....
i've tried many times but there's no progress...
something wrong i do..?

[ycyas]

it should work on the suse 10.1 too.. maybe try with smb://192.168.1.2


i installed suse 10.0 and 10.2(i havt tried out 10.1) on that thosiba labtop with nvidia card it just gives 800x600res on the screen and can not be changed to 1024x768res -thats why i have to use another linux distro so i use ubuntu and it works good so far exept telnet not want so like on suse.

[luks]

when i typed smb://192.168.1.2/ it show only an empty folder named home