E680i flash BIG problems

[Serega_G]

I have E680i from China Mobile.
I turn it on, the screen shows MotoLogo and was switched off.
Now there is no chance to switch it on (no firmware flashing before).
When I push On/Off button the phone just blinking once by blue light on the joystick and that's it!
If power cord connected it's blinking by blue light on the joystick and when the power cord diconnecting it's blinking by red on M.
I push "three buttons" the blue screen shows:

reset BP
end reset BP
FLAG=0[95aa95aa
RESET=0x00000001
BRESET=0x00000000
ARESET=0x00000000
start reflash code!

EZX AP bootloader.
Version 3.0 2004-05-18

I install PST 7.2.3_GENERAL, run it. Phone connected.
Have downloaded E680I_G_0D.C5.ABP_0D.B3.B1P_T674VE_L001_S004_P006_GSOE680IT674VE007_full.shx
and
E680I_G_0D.C5.ABP_0D.B3.B1P_T674VE_L001_S004_P006_GSOE680IT674VE007_fullCG36.smg
from Sandman topic.
Try to flash as explained.... with CG36 replacing
Log file shows:

Line: 139
ERROR: Файл "C:\Downloads\E680i New FMRW\1\E680I_G_0D.C5.ABP_0D.B3.B1P_T674VE_L001_S004_P006_GSOE680IT674VE007_full.hmg" не найден.
File: Y:\test_dev_usb\flash\code\flashdll\pst_fp_fileio.cpp

Line: 139
ERROR: Файл "C:\Downloads\E680i New FMRW\1\E680I_G_0D.C5.ABP_0D.B3.B1P_T674VE_L001_S004_P006_GSOE680IT674VE007_full.hmg" не найден.
File: Y:\test_dev_usb\flash\code\flashdll\pst_fp_fileio.cpp

Line: 3922
ERROR: Phone[0000]: The "Secure_Motorola_Flash" Interface could not be found.

The super-file is secure and for re-flash;

the phone needs a super-file that is not secure and for reflash.
File: Y:\test_dev_usb\flash\code\flashdll\PST_FP_FlashThread.cpp

Line: 3922
ERROR: Interface AP-OS: Error verifying Code Group 36 checksums. File: 0x1871, Phone: 0x137B
File: Y:\test_dev_usb\flash\code\flashdll\PST_FP_FlashThread.cpp

Line: 3922
ERROR: Phone[0000]: *********Flash FAILED!!!*********
File: Y:\test_dev_usb\flash\code\flashdll\PST_FP_FlashThread.cpp

Disconnect USB, remove battery, install battery, Push On/Off button - joystick blink once by blue light and nothing happened!!!!!
I try to flash E680I_G_0D.C5.A4P_0D.B0.B1P_T674KV_L001_S015_P004_GSOE680IT674KV006_full.shx - the same result.
What is going on? I don't know which version of firmware currently (original) was installed.
Please HELP !!!!!!!!!!!!!!!!!!!!!!!!!!

[Serega_G]

I am searching for solution. But as I see - nobody knows this bug. Few guys asked the same problem some times ago, but nobody answer them...

Who can helps?????????

[andh1ka]

what did you do before that happened ?
did you combine the shx with different cg file ?
one of my friend did that, and he had to bring the phone to motorola to get replacement... (the phone was dead and not reflashable, bootloader and any other attempts didn't help)

[Serega_G]

I just switch it On. I saw MotoLogo, after that phone automatically switched off and that's it! I think that the problem is in firmware. I'm trying to flash it but nothing happens... The second problem is that I don't know which firmware version I have (because phone works few seconds in the begining). I have tried to combine shx with different cg files, I have tried to flash shx without any "additions" - always the same result - NOTHING.

[andh1ka]

try to charge the phone battery using the wall charger, just plug it for 3-4 hours, then do the bootloader using 3 shortcut and then flash the phone again.
DO NOT!!! flash the phone with shx and cg that is in different version (eg. C5A4P shx combined with cg33 for C5ABP)

if all of this step still not reviving your phone, then try the motorola service centre hope your phone is still in warranty coverage...

[Serega_G]

Nothing happens. Ok, I will send it back. It's just few days in use.... Warranty available.