Complete Idiot's Guide To Flashing & Programs For E

[MeSS7enger]

FYI - I think that some of the problems I experienced during the flash/upgrade process are due to the fact that the C5_A4 firmware is now on version 1.4. At least that I saw the 1.3 version is no longer posted.

I read the read me file which notes that there are changes including the fact that the NEO loader is now included in the firmware, and doesn't need to be loaded separately.

I'm not sure what all else is included, but just wanted to make a comment that this may have resulted in some of my issues, and may create headaches for others.

Thanks,

M

[wing103]

Anyone in this formu living in Boston area? I will pay you to help me to do the upgrade firmware. anyone?

[buzzus2002]

HELP!! ME!!
-------------------------------------------------
7) Post Flashing
- Getting CG33 up and running.
- The instructions were included with the file when you downloaded it however I'll paste them here aswell

Steps to be done after installation this CG33 unicode:
1. Create a folder named "Startup" in /diska/.system folder and put all startup scripts there. (diska just referes to your phones memory/harddrive (the 50mb in size one if you dont understand
2. Copy 7 files (.GainTable.txtvbr_dash.wav,vbr_dot.wav,vbr_normal.wav,vbr_dotdot.wav,vbr_pulse.wav,vbr_dotdash.wav) to /diska/.system folder. If you forget to put 7 files in /diska/.system folder, you can not hear any sound from phone's speakers or your phone can not vibrate.
3. Copy acmattach.txt to root directory of the phone (/diska/acmattach.txt). Your phone will switch to telnet mode automatic when usb cable plugged in. You rename file acmattach.txt in /diska folder to enable or disable this feature.
4. Copy bins.mtf to root directory of the phone (/diska/bins.mtf). Tap on this file, the phone will create two folder "bin" and "lib" in /diska/.system. The bin folder contains bash2, nano..., the lib folder contains share libraries.
5. copy restore-native.lin to memory card. You can put this file in any folder of memory card. When you want to restore native database, tap on it.

----------------------------------------------------------------------


hi everybody, I need ur precious help! I am stuck at Step 7( Post Flashing)
I downloaded this CG33 , (E680I_G_0D.C5.ABP_0D.B3.B1P_T674VE_L001_S004_P006_GSOE680IT674VE007_fullCG33.smg) and (E680I_G_0D.C5.ABP_0D.B3.B1P_T674VE_L001_S004_P006_GSOE680IT674VE007_fullCG36.smg)


After extract the file i downloaded (CG33)

I saw this

(E680I_G_0D.C5.ABP_0D.B3.B1P_T674VE_L001_S004_P006_GSOE680IT674VE007_fullCG33.smg)(if you use C5_AB firmware)
E680I_G_0D.C5.ABP_0D.B3.B1P_T674VE_L001_S004_P006_GSOE680IT674VE007_fullCG36.smg)(if you use C5_AB firmware)


Qnoes it means if I am using this firmware i need to have this 2 smg?
---------------------------------------------------------------
After that it call me to do this..

Steps to install this CG33 unicode:
1. After download and unzip you will have following files:
readme.txt
E680I_G_0D.C5.A4P_0D.B0.B1P_T674KV_L001_S015_P004_GSOE680IT674KV006_fullCG33.smg (if you use C5_A4 firmware)
E680I_G_0D.C5.ABP_0D.B3.B1P_T674VE_L001_S004_P006_GSOE680IT674VE007_fullCG33.smg (if you use C5_AB firmware)
E680I_G_0D.C5.ABP_0D.B3.B1P_T674VE_L001_S004_P006_GSOE680IT674VE007_fullCG36.smg (if you use C5_AB firmware)
.GainTable.txt
vbr_dash.wav
vbr_dot.wav
vbr_normal.wav
vbr_dotdot.wav
vbr_pulse.wav
vbr_dotdash.wav
test_multi_languages.txt --> open this file to test unicode
bins.mtf --> this file contain silivo's bash2, nano...
acmattach.txt --> auto telnet when usb cable plugged in
restore-native.lin --> this file to restore native database

Qnk, I had this acmattach.txt? Rename? Copy and rename to? What is
auto telnet when usb cable plugged in? What does this mean?

-----------------------------------------------------------------------
2. Use PST to flash:
Replace motorola origin smg with:
E680I_G_0D.C5.A4P_0D.B0.B1P_T674KV_L001_S015_P004_GSOE680IT674KV006_fullCG33.smg (if you use C5_A4 firmware)
or
E680I_G_0D.C5.ABP_0D.B3.B1P_T674VE_L001_S004_P006_GSOE680IT674VE007_fullCG33.smg (if you use C5_AB firmware)
E680I_G_0D.C5.ABP_0D.B3.B1P_T674VE_L001_S004_P006_GSOE680IT674VE007_fullCG36.smg (if you use C5_AB firmware)

during "Erasing flash memory" process.


Qn:Ok, PST to flash? Pst only can flash Shx file? does it mean this shx file? "E680I_G_0D.C5.ABP_0D.B3.B1P_T674VE_L001_S004_P006_GSOE680IT674VE007_full.shx". Then copy the smg file to replace the old one?
-----------------------------------------------------------
3. Use Flashkit to flash:
rename E680I_G_0D.C5.A4P_0D.B0.B1P_T674KV_L001_S015_P004_GSOE680IT674KV006_fullCG33.smg to c5a4_cg33.smg
or
rename E680I_G_0D.C5.ABP_0D.B3.B1P_T674VE_L001_S004_P006_GSOE680IT674VE007_fullCG33.smg to c5ab_cg33.smg
rename E680I_G_0D.C5.ABP_0D.B3.B1P_T674VE_L001_S004_P006_GSOE680IT674VE007_fullCG36.smg to c5ab_cg36.smg

flashcp -v c5a4_cg33.smg /dev/mtd5
or
flashcp -v c5ab_cg33.smg /dev/mtd5
flashcp -v c5ab_cg36.smg /dev/mtd6

Qn:What is flashkit? again use the shx file then the smg rename and replace the orgin smg file?
--------------------------------------------------------------------

Steps to be done after installation this CG33 unicode:
1. Create a folder named "Startup" in /diska/.system folder and put all startup scripts there.
2. Copy 7 files (.GainTable.txtvbr_dash.wav,vbr_dot.wav,vbr_normal.wav,vbr_dotdot.wav,vbr_pulse.wav,vbr_dotdash.wav) to /diska/.system folder. If you forget to put 7 files in /diska/.system folder, you can not hear any sound from phone's speakers or your phone can not vibrate.
3. Copy acmattach.txt to root directory of the phone (/diska/acmattach.txt). Your phone will switch to telnet mode automatic when usb cable plugged in. You rename file acmattach.txt in /diska folder to enable or disable this feature.
4. Copy bins.mtf to root directory of the phone (/diska/bins.mtf). Tap on this file, the phone will create two folder "bin" and "lib" in /diska/.system. The bin folder contains bash2, nano..., the lib folder contains share libraries.
5. copy restore-native.lin to memory card. You can put this file in any folder of memory card. When you want to restore native database, tap on it.
6. Restart the phone


Qn: I am stuck at step 3, rename the file then put at where? "Your phone will switch to telnet mode automatic when usb cable plugged in"
My phone does not had this?

Qn: step 5, . "copy restore-native.lin to memory card. You can put this file in any folder of memory card. When you want to restore native database, tap on it." When I copy this to the phone and I click it, phones says" Cannot not operate"

Thanks, this is my problem, I reallly idoit to this flashing..

[ndpndnt16]

you make this topic worse you can ask questions one by one

[buzzus2002]

I downloaded this CG33 , (E680I_G_0D.C5.ABP_0D.B3.B1P_T674VE_L001_S004_P006_GSOE680IT674VE007_fullCG33.smg) and (E680I_G_0D.C5.ABP_0D.B3.B1P_T674VE_L001_S004_P006_GSOE680IT674VE007_fullCG36.smg)


After extract the file i downloaded (CG33)

I saw this

(E680I_G_0D.C5.ABP_0D.B3.B1P_T674VE_L001_S004_P006_GSOE680IT674VE007_fullCG33.smg)(if you use C5_AB firmware)
E680I_G_0D.C5.ABP_0D.B3.B1P_T674VE_L001_S004_P006_GSOE680IT674VE007_fullCG36.smg)(if you use C5_AB firmware)


Qnoes it means if I am using this firmware i need to have this 2 smg?
---------------------------------------------------------------
After that it call me to do this..

Steps to install this CG33 unicode:
1. After download and unzip you will have following files:
readme.txt
E680I_G_0D.C5.A4P_0D.B0.B1P_T674KV_L001_S015_P004_GSOE680IT674KV006_fullCG33.smg (if you use C5_A4 firmware)
E680I_G_0D.C5.ABP_0D.B3.B1P_T674VE_L001_S004_P006_GSOE680IT674VE007_fullCG33.smg (if you use C5_AB firmware)
E680I_G_0D.C5.ABP_0D.B3.B1P_T674VE_L001_S004_P006_GSOE680IT674VE007_fullCG36.smg (if you use C5_AB firmware)
.GainTable.txt
vbr_dash.wav
vbr_dot.wav
vbr_normal.wav
vbr_dotdot.wav
vbr_pulse.wav
vbr_dotdash.wav
test_multi_languages.txt --> open this file to test unicode
bins.mtf --> this file contain silivo's bash2, nano...
acmattach.txt --> auto telnet when usb cable plugged in
restore-native.lin --> this file to restore native database

Qnk, I had this acmattach.txt? Rename? Copy and rename to? What is
auto telnet when usb cable plugged in? What does this mean?

[buzzus2002]

Qn:Ok, PST to flash? Pst only can flash Shx file? does it mean this shx file? "E680I_G_0D.C5.ABP_0D.B3.B1P_T674VE_L001_S004_P006_GSOE680IT674VE007_full.shx". Then copy the smg file to replace the old one?

[buzzus2002]

What is flashkit? again use the shx file then the smg rename and replace the orgin smg file?

[buzzus2002]

Steps to be done after installation this CG33 unicode:
1. Create a folder named "Startup" in /diska/.system folder and put all startup scripts there.
2. Copy 7 files (.GainTable.txtvbr_dash.wav,vbr_dot.wav,vbr_normal.wav,vbr_dotdot.wav,vbr_pulse.wav,vbr_dotdash.wav) to /diska/.system folder. If you forget to put 7 files in /diska/.system folder, you can not hear any sound from phone's speakers or your phone can not vibrate.
3. Copy acmattach.txt to root directory of the phone (/diska/acmattach.txt). Your phone will switch to telnet mode automatic when usb cable plugged in. You rename file acmattach.txt in /diska folder to enable or disable this feature.
4. Copy bins.mtf to root directory of the phone (/diska/bins.mtf). Tap on this file, the phone will create two folder "bin" and "lib" in /diska/.system. The bin folder contains bash2, nano..., the lib folder contains share libraries.
5. copy restore-native.lin to memory card. You can put this file in any folder of memory card. When you want to restore native database, tap on it.
6. Restart the phone


Qn: I am stuck at step 3, rename the file then put at where? "Your phone will switch to telnet mode automatic when usb cable plugged in"
My phone does not had this?

Qn: step 5, . "copy restore-native.lin to memory card. You can put this file in any folder of memory card. When you want to restore native database, tap on it." When I copy this to the phone and I click it, phones says" Cannot not operate"

Thanks, this is my problem, I reallly idoit to this flashing..

[buzzus2002]

Any singapore user here?

[buzzus2002]

Hi, can anyone pls help me? how to install linloader? the plug card I used the wordpad to edit it. I saved as .txt and unicode. After i restart the phone I still cannot see the linloader or appname..