Problem with 3.5mm to 2.5mm adaptor

[chacarel]

I bought the adaptor from SLS, but it will auto answer my incoming calls when i'm listening to music. This happen coz the adaptor is 2/3 plug into the phone, to have stereo sound. Sigh...

Anyone encounter the same problem? Try to get the 4 lines adaptor (3.5mm to 2.5mm) from ebay, hopefully it works fine with E680.

[admin]

well for me its differnt, if an incoming calls come, and i plug out adapter to listen to call, the line will drop. usually i have to answer first then plug out the adapter.

[azn_damien]

well for me its differnt, if an incoming calls come, and i plug out adapter to listen to call, the line will drop. usually i have to answer first then plug out the adapter.

this happened to me too (until i lost my adapter )

[ycyas]

soldering the ear- headphones to the original motorola headset-cable instead using the "big antenna" (2,5 to 3,5 adaptor)!

[inijohan]

Yea ... I guess keeping the original cable is still the best trick. Step-by-step tutorial, y-cyas???

[chacarel]

i'm using the bluetooth headset, so don't really want to use the original motorola earpiece. furthermore, the earpiece is too huge for me. Keep dropping out from my ear...& keep "hammering" others..hahaa...

bidding on the adaptor with 3 lines. Will update u guys once i got the adaptor. ~praying hard~

[ycyas]

Change the e680 in-reaphones to better ones.

1. open your in-earphone speakers may with a smal knife or similar, until you se the back of the smal in-ear speakers with its cable,

2. heat up the solderdevide and unsolder the cable from the smal speaker, also do it on the other one speaker.

3. open the speaker from the new in-earphones (or headphones) until see the cable.

4. unsolder the original cable from the new headphones and change it with the the original motorola e680 cable.

5. solder the e680 cable on back from the speakers from the new headphones and close it so that it looks good again like new.

6. test it on your e680 and have fun with it

so, i hope this tutorial is usefull for they who want change thier earphones.
its easy to change the cable to the new headphones.

[azn_damien]

thanks for the tutorial. im goin 2 go buy a new set of the oem moto headset first just in case haha