problem in touch screen

[princejk]

I suggest you to try the screen calibration under the setup menu.

Even after calibrating if it doesn't work, you need to change the touch screen.

[anup13]

yes, i tries to do that also..
its problem of loose connection.. sometime touch screen work fine.. but some time its behave like anything..
i have to press bit above navigation keys on keypad. just bellow touch screen then it works fine.. may be problem with digitiser i feel so.

I suggest you to try the screen calibration under the setup menu.

Even after calibrating if it doesn't work, you need to change the touch screen.

[kamesh]

If ur touchscreen doesnt work try these 2 methods it will surely wrk:-

(1) try calibrating the screen.if it doesnt work go to step 2

(2) i had same problem tht my touchscreen was behaving whacky. you can change the digitizer which cost 400rs or if u want a low cost method then see the disassembling video on youtube of motorokr e6 and open the phone urself. now jst above the keypad after opening,press the joint .. and the main point to remember is tht when u again assemble back the phone then donot tightly put the 4 screws back in phone. Jst put the screw loosely and it wrks gr8 4 me..

try doing it urself...

[anup13]

Will try to do that..
hope it will work. other wise i have to spend 400 .
i don't want to loose this phone. in market there is no phone in compare to E6

If ur touchscreen doesnt work try these 2 methods it will surely wrk:-

(1) try calibrating the screen.if it doesnt work go to step 2

(2) i had same problem tht my touchscreen was behaving whacky. you can change the digitizer which cost 400rs or if u want a low cost method then see the disassembling video on youtube of motorokr e6 and open the phone urself. now jst above the keypad after opening,press the joint .. and the main point to remember is tht when u again assemble back the phone then donot tightly put the 4 screws back in phone. Jst put the screw loosely and it wrks gr8 4 me..

try doing it urself...

[kamesh]

anup if u dont want 2 try disassembling of phone...
u can make ur motorokr wrking by pressing the motorola written which is jst above d keypad
ur phone will wrk until u press tht area continuously..
if u dont press it it will again become whacky..
so which ever method seem good 2 u ,u can try tht..

[anup13]

till now i was doing the same..
but its boring.. so better to do fix it..

anup if u dont want 2 try disassembling of phone...
u can make ur motorokr wrking by pressing the motorola written which is jst above d keypad
ur phone will wrk until u press tht area continuously..
if u dont press it it will again become whacky..
so which ever method seem good 2 u ,u can try tht..

[slm_satish]

Even i'm having the same problem. where can i get the digitizer?

[kamesh]

Hey Freinds, i found a new & cheaper way to make the touchscreen work again....
if ur touch screen is not working properly And is wrking only when u press the motorola written on the phone jst try this ...
1. firstly u have to disassemble ur phone...
u can see disassembling video on u tube...
2.Now u have 2 make a small role of piece of paper and put itbetween touchscreen and the metal cover beneath battery...
3.it tightens the screen again & my phone is working wonders:-
i will post some screenshots in few days...

[slm_satish]

Hi guys i disassembled my ROKR. But now i am not able to remove the front screen (I removed the touch screen) from the panel. Could anyone help me out? Actually i need to change the digitizer. But don't know how to remove it from the front housing. Could anyone help me?