radiocomm

[nitz]

whn i connected my motoe6 to radiocomm and add aplha script then i run alpha script then i got some error on red screen like this...can anyody tell me wht is this error ?

Sending 'RDELEM' command with data '0032000100000200' to the radio...
Sent to radio: 410200000800100000000020000800000032000100000200
Returned from radio:
RDELEM ==>FAILED
Driver answer ==> 267
Error Description ==> Failed attempt to send test command, Test Command Interface is not present.
Time to execute command: 0 seconds.
Command timeout set to : 15 seconds.

[TEPEM]

Hi, that means that either smth. went wrong when connecting your phone and installing drivers or inappropriate setup is applied to Rdiocomm.
Presuming you installed the latest drivers for your phone in Windows (it would ask you for the drivers if you install Radiocomm and then connect your phone in the <Modem> mode and it would be installing like 15 different components as separate drivers) you need to set your phone in <Modem> mode as I already told and then in Radiocomm in application bar go to [Main]-> [MA]-> set [GSM] and in [Settings] -> [TCPIP]-> set [M-Link USB LAN Drive]. After you do this RadioComm icon in the systray should be of any color except red. In my case it is green and it says <USB TC> - once you get the same you can activate Edge with Alpha's script as described.
Wish you luck - let us know the progress and ask me if you need further assistance.

[nitz]

thanx edge is activated on my mobile .but pls tell me the difference between edge and gprs ? and the alpha script which i hav done its change G logo to E OR REALLY ACTIVATED EDGE SERVICE...?

[TEPEM]

Hi Nitz, glad you succeeded!
Ok, here's the basic info on both GPRS and EDGE in order for you to have the general idea:
GPRS stands for "General Packet Radio Service" and supports data transfer from 56 up to 114 kbps.
EDGE stands for "Enhanced Data rates for GSM Evolution" (also known as Enhanced GPRS) and supports data transfer up to 236.8 kbps.
What regarding your doubts... well, considering abovementioned info on both GPRS and EDGE I think you should obviously see connection speed difference.
You can test your speed - here's the link - http://text.dslreports.com/mspeed?jisok=1
Hope that helps - please keep me updated what connection speed you reach and there's another question what Firmware and what GSM provider you have?

[nitz]

thanx for helpin me dear i got 115kbps speed m usin airtel gsm and i don't know how to check firmware 2... and i hav another mobile nokia6300 edge is activated in this mobile whn i use this mobile i got 460kbps speed .

[TEPEM]

Airtel GSM - you're in India, right?
Anyways, 115 kbps for your phone means that EDGE is activated indeed since you can take a quick look here and see that GPRS in E6 supports only 32 - 48 kbps.
In order to check your firmware go to dialpad and enter www008w
(In order to get "w" in dialpad press button in the bottom left corner go to [Insert] and select <Wait(W)>)
By the way Nokia 6300 has the same class EDGE component as ROKR E6 (Class 10) what actually means (taking into consideration facts you provided) that Airtel GSM lobbies for Nokia, hehehe
Ok, hear from you soon!

[nitz]

thanx i got the point but if u go to http://www.extragsm.com/moto-rokre6.php

thr is no in edge service but i know edge is activated in my phone thanx once again, one more request pls tell me if u know abt wifi in e6 and call recording without beep ...m waitin for ur reply
regards
nitz

[TEPEM]

Regarding "no EDGE"// haha! Bulshit, these guys from extragsm never really cared about even looking at official phone specifications from Motorola - you can find facts sheet for our phone attached to my post - check it.
What considering voice recording without beeps as I commented in your other post regarding it there's no such possibility yet.

[dhayasinfo]

Hi all,

How can i identify whether my E6 edge is activated or not.... And what is the procedure to activate it if needs?

dhaya
(chennai)

[TEPEM]

Hi Chennai,
the easiest way for you would be to check what letter appears beside antenna signal indicator when you're connecting to Internet on your mobile browser. If it is "E" then you have your Edge activated, if it's "G" then you're running GPRS connection.