BlueZ initialised

[tazzix]

actually the headset tries to connect on startup to the phone, here is the dump which says Discon successful at the end

bluetooth # hcidump
HCI sniffer - Bluetooth packet analyzer ver 1.25
device: hci0 snap_len: 1028 filter: 0xffffffff

> HCI Event: Connect Request (0x04) plen 10
< HCI Command: Accept Connection Request (0x01|0x0009) plen 7
> HCI Event: Command Status (0x0f) plen 4
> HCI Event: Link Key Request (0x17) plen 6
< HCI Command: Link Key Request Negative Reply (0x01|0x000c) plen 6
> HCI Event: Command Complete (0x0e) plen 10
< HCI Command: Link Key Request Negative Reply (0x01|0x000c) plen 6
> HCI Event: Command Complete (0x0e) plen 10
> HCI Event: PIN Code Request (0x16) plen 6
< HCI Command: PIN Code Request Reply (0x01|0x000d) plen 23
> HCI Event: Command Complete (0x0e) plen 10
< HCI Command: PIN Code Request Reply (0x01|0x000d) plen 23
> HCI Event: Command Complete (0x0e) plen 10
> HCI Event: Link Key Notification (0x18) plen 23
> HCI Event: Connect Complete (0x03) plen 11
< HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
> HCI Event: Command Complete (0x0e) plen 6
> ACL data: handle 7 flags 0x02 dlen 12
    L2CAP(s): Connect req: psm 1 scid 0x0040
< ACL data: handle 7 flags 0x02 dlen 16
    L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0
      Connection successful< HCI Command: Change Connection Packet Type (0x01|0x000f) plen 4
> HCI Event: Command Status (0x0f) plen 4
> HCI Event: Number of Completed Packets (0x13) plen 5
> ACL data: handle 7 flags 0x02 dlen 16
    L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
      MTU 334
< ACL data: handle 7 flags 0x02 dlen 14
    L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
      Success< ACL data: handle 7 flags 0x02 dlen 12
    L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 0
> HCI Event: Connection Packet Type Changed (0x1d) plen 5
> ACL data: handle 7 flags 0x02 dlen 18
    L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 4
      Success
      MTU 334
> ACL data: handle 7 flags 0x02 dlen 18
    L2CAP(d): cid 0x0040 len 14 [psm 1]
        SDP SS Req: tid 0x1 len 0x9
          pat uuid-16 0x111f (Handsfree AG)
          max 10
          cont 00
> HCI Event: Number of Completed Packets (0x13) plen 5
< ACL data: handle 7 flags 0x02 dlen 14
    L2CAP(d): cid 0x0040 len 10 [psm 1]
        SDP SS Rsp: tid 0x1 len 0x5
          count 0
          cont 00
> HCI Event: Number of Completed Packets (0x13) plen 5
> ACL data: handle 7 flags 0x02 dlen 12
    L2CAP(s): Disconn req: dcid 0x0040 scid 0x0040
> ACL data: handle 7 flags 0x02 dlen 12
    L2CAP(s): Connect req: psm 1 scid 0x0041
< ACL data: handle 7 flags 0x02 dlen 12
    L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040< ACL data: handle 7 flags 0x02 dlen 16
    L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0041 result 0 status 0
      Connection successful
> HCI Event: Number of Completed Packets (0x13) plen 5
> HCI Event: Number of Completed Packets (0x13) plen 5
> ACL data: handle 7 flags 0x02 dlen 16
    L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
      MTU 334
< ACL data: handle 7 flags 0x02 dlen 14
    L2CAP(s): Config rsp: scid 0x0041 flags 0x00 result 0 clen 0
      Success< ACL data: handle 7 flags 0x02 dlen 12
    L2CAP(s): Config req: dcid 0x0041 flags 0x00 clen 0
> HCI Event: Number of Completed Packets (0x13) plen 5
> HCI Event: Number of Completed Packets (0x13) plen 5
> ACL data: handle 7 flags 0x02 dlen 18
    L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 4
      Success
      MTU 334
> ACL data: handle 7 flags 0x02 dlen 18
    L2CAP(d): cid 0x0040 len 14 [psm 1]
        SDP SS Req: tid 0x2 len 0x9
          pat uuid-16 0x1112 (Headset AG)
          max 10
          cont 00
< ACL data: handle 7 flags 0x02 dlen 14
    L2CAP(d): cid 0x0041 len 10 [psm 1]
        SDP SS Rsp: tid 0x2 len 0x5
          count 0
          cont 00
> ACL data: handle 7 flags 0x02 dlen 12
    L2CAP(s): Disconn req: dcid 0x0040 scid 0x0041
> HCI Event: Number of Completed Packets (0x13) plen 5
< ACL data: handle 7 flags 0x02 dlen 12
    L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0041
> HCI Event: Number of Completed Packets (0x13) plen 5
< HCI Command: Disconnect (0x01|0x0006) plen 3
> HCI Event: Command Status (0x0f) plen 4
> HCI Event: Disconn Complete (0x05) plen 4 

[rpconnect]

anyone interested in trying out a beta version of a j2me-based bluez manager? right now its basically an interface to start the bluez stuff, browse for other devices and specify the params and make either a dund or pand connection. its in a very rough draft state, and not as much fun as trying things out via a telnet session, but for those interested its an option.

I am waiting to see if a NEO package can handle both a native executable (e.g. the demon to handle commands from the j2me app) as well as the j2me interface; if so, and w/ cyph's, pnail's, mack's and cytux's permission, then i'd like to put everything together into a single package (bluez utils and libs, ezx-hciattach, ip routing bins, mack's connectivity pack, bash scripts and the j2me management app). If anyone has any insight on packaging all of this into a single NEO package i'd love to hear it, .

[mightymop]

anyone interested in trying out a beta version of a j2me-based bluez manager? right now its basically an interface to start the bluez stuff, browse for other devices and specify the params and make either a dund or pand connection. its in a very rough draft state, and not as much fun as trying things out via a telnet session, but for those interested its an option.

sounds interesting
yes i could try when i have time @ weekend

[tazzix]

I would love to try, even if the installation is more than a NEO package.

[inijohan]

How's the progress of this development, btw? Just curious.

[rpconnect]

sorry to throw this out there and not do anything about it, i got side tracked w/ work and after trying out cyph's new oe-based opie package the bluetooth manager app included seems a lot better GUI than I could do and i think at this point i'm leaning toward putting my effort into getting the opie bluetooth stuff working properly.

what i do have is a j2me app that starts up the bluez stuff and can scan for devices, but the interface w/ the bluez utils is not as clean as it could be and right now to get things working requires too much screwing around to make a clean install possible.

i should throw this topic out to general development because after trying j2me stuff (that doesn't allow for standard exec'ing of system calls) and various forms of native development against the Mot modified qt-libs (with includes that are not currently 100% compatable w/ some open-source version of qt) as a beginner i have found developing for opie to be the most reliable and documented option. I may be wrong on this, and if possible i'd prefer to develop w/ the native ezx environment, but w/o 100% compatibility w/ some open-souce gui (e.g. whatever version of qt) it is just too frusterating trying to develop when you don't know when you will run into a hole w/o a reverse-engineerd solution.

[tvsdeepak]

Hi guys,
Am able to establish a PAN/PPP connection from my motorola device using the packages Thanks for all your efforts.
Can anyone tell me if it is possible to control the speed of my bluetooth connection. We can have 8 connections max at anytime right. So if I am using only 1/2 can I change the settings such that all the bandwidth is allocated to 1 or 2 channels. Any pointers as to where I can know more about it ???
Thanks in advance
Deepak

[Juan_Garcia]

Hi guys,
Am able to establish a PAN/PPP connection from my motorola device using the packages Thanks for all your efforts.
Can anyone tell me if it is possible to control the speed of my bluetooth connection. We can have 8 connections max at anytime right. So if I am using only 1/2 can I change the settings such that all the bandwidth is allocated to 1 or 2 channels. Any pointers as to where I can know more about it ???
Thanks in advance
Deepak

What is PPP???? share conection between pc and mobile?

[[ds]dragonslayerz]

sorry i'm kinda noob, but when u say explore further into the bluetooth system, what do u mean by that? what does this program/coding do to the current bluetooth?

[dino]

Hi guys,
could someone please let me know why it isn't possible to get audio over bluetooth headset to work?
I mean according to the bluetooth specification, audio seems to be a very low level protocol, and cyph's blueZ includes an audio SCO module. So what is missing?