Join Today
+ Reply to Thread
Results 1 to 7 of 7
  1. #1
    Join Date
    Jun 2005
    Location
    Leuven, Belgium
    Posts
    103

    Default "failed to register with the network" error

    I flashed the phone but out of battery, the flash was failed. After that, I recharged and successful flashing with Asian firmware R52_G_0D.50.AHP_0D.41.B1P
    However, now I can search for the network but cannot register, "failed to register with the network" error. Is this the firmware problem or hardware problem?
    I use BASE network in Belgium.

  2. #2
    Join Date
    Jul 2005
    Location
    Franconia
    Posts
    4,866

    Default

    i suppose you checked first if your SIM card works in another mobile.

    can you "Add to Preffered"?

    second idea:
    flash with another firmware.
    1. get the transistion from Mareckis post:
    A780 firmware question - Page 2 - MotorolaFans.com Forums
    2. flash to .74 or .76 european
    Last edited by swifty; 04-25-2008 at 10:56 AM.

  3. #3
    Join Date
    Jun 2005
    Location
    Leuven, Belgium
    Posts
    103

    Default

    1. I can search and add network to "preferred network", but cannot register.
    2. Actually, my phone is an Asian version. I tried to test the European once before but it couldn't install .JAR file so i quited and backed to Asian version.
    3. Tonight, I will try to flash with European again, will report soon.

  4. #4
    Join Date
    Jun 2005
    Location
    Leuven, Belgium
    Posts
    103

    Default

    yes, you are right, swifty. it's because the SIM is damaged. i don't know if it can damage if you flash too many times?
    anyways, thanks

  5. #5
    Join Date
    Jun 2005
    Location
    Leuven, Belgium
    Posts
    103

    Default

    These days, I tried some solutions to recover the phone but I realized that my phone was DEAD. Now I just can use my phone as an PDA but not a phone anymore.
    Anyone has the same problem after 3 years using A780? Is it time to replace it?

  6. #6
    Join Date
    Jun 2006
    Location
    romania
    Posts
    149

    Default maybe you can try this

    i also had this problem with my a780.but i solved like this.just copy paste al data from the text thru radiocomm.hope it will help you.sorry for my bad english.you have the original dicution here: http://www.motorolafans.com/forums/s...780+no+network
    Attached Thumbnails Attached Thumbnails "failed to register with the network" error-phase_large_373.jpg  
    Attached Files Attached Files

  7. #7
    Join Date
    Jun 2005
    Location
    Leuven, Belgium
    Posts
    103

    Default

    Quote Originally Posted by plvt_florian View Post
    i also had this problem with my a780.but i solved like this.just copy paste al data from the text thru radiocomm.hope it will help you.sorry for my bad english.you have the original dicution here: http://www.motorolafans.com/forums/s...780+no+network
    Today, I tried to enter the code from table. Everything is okay except the following:
    Code:
    Phase Parametar:
    78 - SEEM_RF_DEFAULT_SPI
    
    Record Number 1:
    3C7D  F000  0042  7504  F11A  0B60  0317  660D
    18E8  121F  0368  0B64  0316  77A2  1B6C  371C
    B3E8  0B68  0316  77B3  1A2C  6A1E  B3E8  0B6C
    0316  77B3  1A2C  6A1E  B3E8  61E4  67CC  97EC
    60A1  4723  C000  2714  002B  3082  2E00  0030
    0291  3763  3538  A183  3DDF  8F40  A66F  4534
    9E49  3F37  4FCB  FF0B  6C83  2E00  0030  0862
    3553  003B  F94C  3DA3  8140  9A2C  4672  5D4B
    7EE7  4F9F  FF50  1AF2  5BA2  005D  5873  7761
    0080  0044  8406  8088  0080  8C00  E390  000A
    C282  A4C4  0300  C820  00D1  2525  D5FD  F4D8
    016F  E325  90DC  0000  FFFF  FFFF  FFFF  FFFF
    FFFF  FFFF  FFFF  FFFF  FFFF  FFFF  FFFF  FFFF
    FFFF  FFFF  FFFF  FFFF  FFFF  FFFF  FFFF  FFFF
    FFFF  FFFF  FFFF  FFFF  FFFF  FFFF  FFFF  FFFF
    FFFF  FFFF  FFFF  FFFF  FFFF  FFFF  FFFF  FFFF
    FFFF  FFFF  FFFF  FFFF  FFFF  FFFF  FFFF  FFFF
    FFFF  FFFF  FFFF  FFFF  FFFF  FFFF  FFFF  FFFF
    FFFF  FFFF  FFFF  FFFF  FFFF  FFFF  FFFF  FFFF
    FFFF  FFFF  FFFF  FFFF  FFFF  FFFF  FFFF  FFFF
    FFFF  FFFF  FFFF  FFFF  FFFF  FFFF  FFFF  FFFF
    FFFF  FFFF  FFFF  FFFF  FFFF  FFFF  FFFF  FFFF
    FFFF  FFFF  FFFF  FFFF  FF
    and
    Code:
    Phase Parametar:
    7D - SEEM_ANTENNA_SWITCH
    
    Record Number 1:
    0132
    
    Record Number 2:
    1150
    
    Record Number 3:
    1556
    
    Record Number 4:
    0534
    So, my phone still cannot make a call even it can find the network. Do you have any suggestion?
    Thanks in advanced!


 
+ Reply to Thread

Similar Threads

  1. Q: Always get Flashing Error "Error jumping to RAM Downloader"
    By MANUP456 in forum A1200 General Chat
    Replies: 7
    Last Post: 05-13-2011, 10:31 AM
  2. "Failed to power on bluetooth"
    By yunebug in forum A1200 General Chat
    Replies: 12
    Last Post: 05-29-2009, 02:02 AM
  3. Replies: 6
    Last Post: 12-07-2008, 05:37 AM
  4. recieve error "A780 driver not found in modems.pac"
    By Conzo427 in forum A780 General Chat
    Replies: 0
    Last Post: 06-02-2006, 12:48 PM
  5. A780 Email error:"Invalid recipient address"
    By Yongyut in forum A780 General Chat
    Replies: 1
    Last Post: 06-23-2005, 04:31 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Single Sign On provided by vBSSO

Search Engine Friendly URLs by vBSEO 3.6.0 RC 1