F/W with GPS (R52_G_0D.74.A2R_0D.C0.B1P) links updated

[xorphan]

Just adding to the phone versions i guess.


My Phone

AP: R52_G_0D.74.A2R

BP: R52_G_OD.41.B1P

BPFLEX: GSOA780T674KF063

DSP: 62252500

------------------

When i run copilot:

after it opens a message pops

"Unable to open CoPilot please make sure the storage card is inserted or that the data has been properly downloaded."

[evaldas]

When i run copilot:

after it opens a message pops

"Unable to open CoPilot please make sure the storage card is inserted or that the data has been properly downloaded."

to run copilot successfully you must create the following directories in transflash card (/mmc/mmca1):
copilot/
copilot/datacd
copilot/save

[samr7]

AP: R52_G_0D.74.A2R
BP: R52_G_0D.39.B1P
BPFlex: GCOA780000SA061 (mine GSOA780T674KF061)
DSP: 62252500

is it typing error with BPFlex version and it must be GSOA* instead?
as you can see the thing differs between yours (with EDGE) and mine (without EDGE) is BPFlex version. there must a be method to find out quickly if this phone supports EDGE or not just looking at BPFlex version.
Also GSOA780T673AUO supports EDGE.

GCOA780000SA061 is correct, not a typo. Check it out, that version is listed as part of a few variants of the R52_G_0D.50.AE firmware in www.motorolafans.com/index.php?name=Forums&file=viewtopic&t=1362]this thread[/url]

So EDGE support is enabled or disabled by the BPFlex?

[maxx_730]

P.S. Maxx_730 you're quoting MASTER!

Im what?

[wizmaster]

is the copilot software available for us to copy on the card?

[leo14888]

AP: R52_G_0D.74.A2R
BP: R52_G_0D.39.B1P
BPFlex: GCOA780000SA061 (mine GSOA780T674KF061)
DSP: 62252500

is it typing error with BPFlex version and it must be GSOA* instead?
as you can see the thing differs between yours (with EDGE) and mine (without EDGE) is BPFlex version. there must a be method to find out quickly if this phone supports EDGE or not just looking at BPFlex version.
Also GSOA780T673AUO supports EDGE.

GCOA780000SA061 is correct, not a typo. Check it out, that version is listed as part of a few variants of the R52_G_0D.50.AE firmware in www.motorolafans.com/index.php?name=Forums&file=viewtopic&t=1362]this thread[/url]

So EDGE support is enabled or disabled by the BPFlex?

My phone's fw was exactly identical to Samr7's, down to the BPFlex version, after flashing the north american 0D.74 . It was a HK version with EDGE.
Because of my own stupidity, I reflash my phone with the firmware found here http://www.www.motorolafans.com/inde...ewtopic&t=1362 , version R52_G_0D.50.AEP_0D.39.B1P hoping that I can once again hand write Chinese on my phone. I figure the AP & BP are the same as my original fw as when I first bought the phone. Little did I know this fw have a different BPFlex. When I turn on my phone, I no longer see the E signal, all I get is G. I desperately wanted my EDGE back, so I reflash back to the 0D.74 hoping that might work. It didn't....
My firmware now reads:

R52_G_0D.74.A2R
BP: R52_G_0D.39.B1P
BPFlex:
GSOA780T672ZD061
DSP 62252500

I guess the BPFlex does control the EDGE function since the only difference is that. The weird thing is I used the Mobile Speed Test and the result is the same as before when I still have the E.

Anybody by any chance know where I can find a firmware with BPFlex GCOA780000SA061? I would love to get my EDGE back.

[samr7]

R52_G_0D.74.A2R
BP: R52_G_0D.39.B1P
BPFlex:
GSOA780T672ZD061
DSP 62252500

Thanks for the tip about EDGE and the BPFlexes.

The German variant of the 74.A2 firmware floating around claims in the file name to include a different BPFlex GCOA780000E1025. Perhaps that one doesn't disable EDGE? It would be truly interesting to get a release notes file for the European firmware, and especially a tool to recombine pieces of SHX files.

I guess the BPFlex does control the EDGE function since the only difference is that. The weird thing is I used the Mobile Speed Test and the result is the same as before when I still have the E.

With HTTP-based speed checks, and my provider T-Mobile USA, it appears to bottleneck on their lame WAP gateway before even approaching the GPRS bandwidth limit.

[Diska.net]

Tried to reflash A780 with R52_G_0D.74.A2R_0D.C0.B1P_SE6820AD3F1_L003_S008_P004_GCOA780000E1025_full.shx
... but after 93% Flash FAILED!!!

HERE ARE FLASH_ERROR_LOG

13:51:54, September 19, 2005
Line: 3922
ERROR: Phone[0000]: The "Secure_Motorola_Flash" Interface could not be found.

The super-file is secure and for re-flash;

the phone needs a super-file that is not secure and for reflash.
File: Y:\test_dev_usb\flash\code\flashdll\PST_FP_FlashThread.cpp

14:03:43, September 19, 2005
Line: 3922
ERROR: Interface AP-OS: Error Flashing Subscriber Unit Error 0xE0020086
while sending address 0x8C18000.
File: Y:\test_dev_usb\flash\code\flashdll\PST_FP_FlashThread.cpp

14:03:43, September 19, 2005
Line: 3922
ERROR: Phone[0000]: *********Flash FAILED!!!*********
File: Y:\test_dev_usb\flash\code\flashdll\PST_FP_FlashThread.cpp


can anybody advise anything?

after not successful reflashing i can turn on my device
when welcome logo appeared first 3 seconds it damage then everythink ok
but i think that not everything properly work

[gutenzein]

Tried to reflash A780 with R52_G_0D.74.A2R_0D.C0.B1P_SE6820AD3F1_L003_S008_P004_GCOA780000E1025_full.shx
... but after 93% Flash FAILED!!!

HERE ARE FLASH_ERROR_LOG

13:51:54, September 19, 2005
Line: 3922
ERROR: Phone[0000]: The "Secure_Motorola_Flash" Interface could not be found.

The super-file is secure and for re-flash;

the phone needs a super-file that is not secure and for reflash.
File: Y:\test_dev_usb\flash\code\flashdll\PST_FP_FlashThread.cpp

14:03:43, September 19, 2005
Line: 3922
ERROR: Interface AP-OS: Error Flashing Subscriber Unit Error 0xE0020086
while sending address 0x8C18000.
File: Y:\test_dev_usb\flash\code\flashdll\PST_FP_FlashThread.cpp

14:03:43, September 19, 2005
Line: 3922
ERROR: Phone[0000]: *********Flash FAILED!!!*********
File: Y:\test_dev_usb\flash\code\flashdll\PST_FP_FlashThread.cpp


can anybody advise anything?

after not successful reflashing i can turn on my device
when welcome logo appeared first 3 seconds it damage then everythink ok
but i think that not everything properly work

Did you flash the R52_G_0D.61.A1R first ?
If not, try flashing this; read the threads in this forum...

[Diska.net]

gutenzein, thx

yes i flashed with 61 before
but i forgot about boot loader
that's why 61th flashed incorrect

now everything OK

thnx