ASK| NEED HELP: Motorola A1200 ATLAS Reader (Radiocomm)

[mymailx_123]

Guys, I know you can't help me with charging problem I had.
Just help me please give the screenshoot or ATLAS Reader default value...

You can see ATLAS Reader from Radiocomm by pressing "Read"
And tell me the default value...

PLEASE.... THank you

[kundancool]

Guys, I know you can't help me with charging problem I had.
Just help me please give the screenshoot or ATLAS Reader default value...

You can see ATLAS Reader from Radiocomm by pressing "Read"
And tell me the default value...

PLEASE.... THank you

what kind of charging problem you have ?

may be I can help with that

[mymailx_123]

what kind of charging problem you have ?

may be I can help with that

Thank you for your reply, finally someone reply...
okay, I don't know what cause it.
I bought an used Motorola A1200

The phone is just freezing anytime... Mostly when it's charging... but sometime, it is in standby. Before it freeze in random, the phone also freeze but only midnight.

Yesterday I tried to flash it but the phone is failed at the middle always. After several times trying, the phone is bricked... (BP_NOT_Ready) Itry to reflash but it always fail between 10 - 20 %
I like this phone model but it is driving me into crazy very much.

I'm so frustration. I mean I have never used this phone but it is acting like this.

[kundancool]

Try flashing this Generic firmware it has helped me many times recovering my phone may be this helps you

Download

if you get constant flashing failed then you can also try different version of RSD Lite (v4.5.5 recommended)

[mymailx_123]

Try flashing this Generic firmware it has helped me many times recovering my phone may be this helps you

Download

if you get constant flashing failed then you can also try different version of RSD Lite (v4.5.5 recommended)

Thank you very much kundancool...
RSD Lite v4.5.5 flashing has fixed bp_not_ready (I flashed it twice), but I still flash 08p / I also try 44p (both of them are H2 track and still freeze charing problem*), and I hope that my phone is still running H2 Track.
I have questions about ur recommendation:

1. The f/w that you recommended is C2 track right? Wll it 100% fix my freeze charging issue?
2. Is it known that A1200 will have "freeze charging" issue? Will it be hardware or just software?

I found another issues...
* I found that I can't enter MBM using non original battery, only the original battery is working... (But my original battery is not good anymore, it has been "pregnant")
** If I use the non original battery it can't charge via USB (laptoP) but original is fine.
*** The indicator of charging is appropriate in original battery. But it's fully wrong charging battery indicator in non original battery (The battery has 2 bars left but when I try to charge it, the phone charging show 4-5%, when I unplug, it is showing 60%)... Is there anything to fix it?

[kundancool]

Thank you very much kundancool...
RSD Lite v4.5.5 flashing has fixed bp_not_ready (I flashed it twice), but I still flash 08p / I also try 44p (both of them are H2 track and still freeze charing problem*), and I hope that my phone is still running H2 Track.
I have questions about ur recommendation:

1. The f/w that you recommended is C2 track right? Wll it 100% fix my freeze charging issue?
2. Is it known that A1200 will have "freeze charging" issue? Will it be hardware or just software?

I found another issues...
* I found that I can't enter MBM using non original battery, only the original battery is working... (But my original battery is not good anymore, it has been "pregnant")
** If I use the non original battery it can't charge via USB (laptoP) but original is fine.
*** The indicator of charging is appropriate in original battery. But it's fully wrong charging battery indicator in non original battery (The battery has 2 bars left but when I try to charge it, the phone charging show 4-5%, when I unplug, it is showing 60%)... Is there anything to fix it?

RSD Lite 4.5.5 (Download link) : http://www.mediafire.com/?z52t0vvwmgz4n5s
H2 track is old firmware and may have problem yes after flashing C2 track firmware you will not be able to switch back to H2 track
but believe me I never wanted to go back to H2 track since I flashed C2 track firmware I am not sure flashing C2 track firmware will help or not but chances are good that it will work

duplicate batteries work on A1200 but you will have to find which one works and which one not
as I am using a duplicate battery since my original one was destroyed by a me due to some problem so I bought a duplicate one and it is still working about older than 1 year
but the same original battery from Motorola W270 doesn't works
that means you have to find a working set of battery for your phone

without full battery its not recommended to flash as fail flashing can cause problems that can be solved but why to take problem so charge it full and then flash
sometimes firmware doesn't extracts so flashing fails without anything happening in that condition just copy firmware file to desktop or any new location then try flashing it

I hope this instruction will be helpful to you

[mymailx_123]

Yeah I've tried the version of RSD Lite you are recommended and seems better than previous I tried but still not working in my Windows 7 laptop.

I have found something else about the duplicate battery (1 week old),
when I use the wall charger the phone is finally booting up...
via Wall Charger
- Charged it to full but after an hour somewhat, the phone is freezing.
via USB PC
- After 1-2 minutes, "Invalid Charger, Operation Stopped" (I have googled and found your thread about this problem)
Battery indicator is mismatched
- The battery has about 60% battery but when I plug USB/Charger, the phone saying only 4%

No problem with original battery at the first trial.
Edit: Phone is freezing after using Wall Charger (Different Wall Charging)...

Is there just a software to diagnose hardware problem (Mobo problem or things like that) in motorola?
Or is there anyway to repair broken PDS without entering C2 Track?

Updated:
I tried EKONSOL + HWtools that I read (After midnight googling) about fixing non-OEM charger (that you Wrote, kundan)
I assume that the tools are working to calibrate internal charging circuit, am I right?
A bit confused in the first time (not familiar w/ Linux), because the command a lil different than Windows (forget 'space').
I tried it over 15 minutes, no freeze so far... Will inform you again...

Kundan,
Thank you in advance again, you are really cool (just like your name)

[kundancool]

to fix driver issues
remove Motorola USB Drivers
Download latest Driver : http://www.motorola.com/staticfiles/...iver_5.4.0.exe

start RSD Lite and flash the firmware(I recommend switching to C2 track but its purely your wish)
don't flash if you don't want to or you feel it is safe not to flash
Firmware Download

you can use the charger application that I use to charge my phone as my phone has chargin issue and doesn't charge by its own so I use it and you feel problem you can use it too
Charger Application : http://www.mediafire.com/?xd5cglo6f4fjd5y

it works great and can charge battery even if it shows not charging on phone status bar

[mymailx_123]

to fix driver issues
remove Motorola USB Drivers
Download latest Driver : http://www.motorola.com/staticfiles/...iver_5.4.0.exe

start RSD Lite and flash the firmware(I recommend switching to C2 track but its purely your wish)
don't flash if you don't want to or you feel it is safe not to flash
Firmware Download

you can use the charger application that I use to charge my phone as my phone has chargin issue and doesn't charge by its own so I use it and you feel problem you can use it too
Charger Application : http://www.mediafire.com/?xd5cglo6f4fjd5y

it works great and can charge battery even if it shows not charging on phone status bar

Hi... unfortunately the phone freeze after 30 minutes...
Here's the result...
Battary 531 60
then I execute ./hwtool -c 5 7
It gives me: (I check ./hwtool -b randomly sequentially)
Battary
568 427
620 430
625 357
633 427
654 392
657 363
658 398
660 414
674 401
(I don't understand what is the second numbers mean because it depleted after minutes and raised again)
Then I don't check it several minutes and the phone --> FREEZE
I unplug the charger and battery
I reopen EKONSOL + HWTOOL,
it gives me
663 0
Then I execute ./hwtool -C 5 7
it gives me
683 329
726 189
731 297
735 344
746 344
I unplug the charger
It gives me:
717 0
The plug in back
733 158
768 53
770 117
I am confused why the second numbers' value is very low compared before I unplug, is it meaning to something?
Can you tell me if it's hardware problem? motherboard chips circuit or something else?

[kundancool]

Hi... unfortunately the phone freeze after 30 minutes...
Here's the result...
Battary 531 60
then I execute ./hwtool -c 5 7
It gives me: (I check ./hwtool -b randomly sequentially)
Battary
568 427
620 430
625 357
633 427
654 392
657 363
658 398
660 414
674 401
(I don't understand what is the second numbers mean because it depleted after minutes and raised again)
Then I don't check it several minutes and the phone --> FREEZE
I unplug the charger and battery
I reopen EKONSOL + HWTOOL,
it gives me
663 0
Then I execute ./hwtool -C 5 7
it gives me
683 329
726 189
731 297
735 344
746 344
I unplug the charger
It gives me:
717 0
The plug in back
733 158
768 53
770 117
I am confused why the second numbers' value is very low compared before I unplug, is it meaning to something?
Can you tell me if it's hardware problem? motherboard chips circuit or something else?

Download : http://www.mediafire.com/?xd5cglo6f4fjd5y (Charger application)
install on your phone and use it after plugging to wall charger

after you start charger application it will show you battery status and charge status you will not need ekonsole or any other app

after you plug the wall charger it will show you status as "charging" if its not charging click on charge button and it will start to charge

battery <battery-current> <charging-current>
max <battery-current> value will be around 730 and when <charging-current> is not 0 means your battery is charging

its better not to mess up and use the charger application that gives real time monitoring of status once charging is complete application will show not charging and the battery icon in status bar will change to invalid battery icon
then remove the charger it will show battery full

once you get used to it you will have no problem