ming won't start after flashing

[aditya584]

hi all,
i have a moto ming with normal F/W 0.8p
i then flashed it to Novin's 1.5beta
i didn't like it and then tried to flash it to marcolnx_a1200
but i couldn't do it...
rsd lite would flash my phone and then ming would be stuck on the startup screen
i tried it again and again many times

i also tried flashing to Amin's EE, white ming, ee16xr firmwares but in all of them the phone was stuck in the startup screen only

i tried bint's 53plus3 . it showed an invalid battery signal on my ming

after all these efforts,i tried to flash it back to novin's 1.5beta and it worked...
so in short,i could flash only to novin's 1.5beta
any efforts to flash it to different firmware would make it stuck on the startup screen or show an invalid battery


please help

[kundancool]

hi all,
i have a moto ming with normal F/W 0.8p
i then flashed it to Novin's 1.5beta
i didn't like it and then tried to flash it to marcolnx_a1200
but i couldn't do it...
rsd lite would flash my phone and then ming would be stuck on the startup screen
i tried it again and again many times

i also tried flashing to Amin's EE, white ming, ee16xr firmwares but in all of them the phone was stuck in the startup screen only

i tried bint's 53plus3 . it showed an invalid battery signal on my ming

after all these efforts,i tried to flash it back to novin's 1.5beta and it worked...
so in short,i could flash only to novin's 1.5beta
any efforts to flash it to different firmware would make it stuck on the startup screen or show an invalid battery


please help

Flash to generic firmware of SAME TRACK do not change your Track or you will brick it.

after you get your phone back in normal flash to any monsterpack you want.

[aditya584]

but dude,thats what i did
from novins 1.5 beta (A1200, A1200R, A1200E)R541" Track,
i went to white ming (A1200, A1200R, A1200E)

but from white ming,i wasnt able to go to Bint's 53p Plus "Standard" & "H2"

[kundancool]

but dude,thats what i did
from novins 1.5 beta (A1200, A1200R, A1200E)R541" Track,
i went to white ming (A1200, A1200R, A1200E)

but from white ming,i wasnt able to go to Bint's 53p Plus "Standard" & "H2"

What base firmware you had ?
H2 I think H2 track base firmware and then they should not work

well If you have problem then flash to C2 track generic firmware 25P which is really good

Well after flashing this you can not go back to H2 track so be careful I don't know what firmwares you are flashing .
C2 Track firmware Link = http://motorolafans.com/MotoModFiles..._11.31.25P.rar

but flash this and then a Monsterpack with only AP no BP tack as wrong BP tracks can brick your phone.
well flash only those firmware which has AP tracks only to make your phone safe.

have any more doubt ask me ...

[aditya584]

My phone came with 0.8p by default,,,standard track
i then went to different firmwares and settled in Novin's 1.5
and from there only switching to white ming is possible now....bint's 0.53p,amin's EE, e16x, marcolnx are not possible

[kundancool]

My phone came with 0.8p by default,,,standard track
i then went to different firmwares and settled in Novin's 1.5
and from there only switching to white ming is possible now....bint's 0.53p,amin's EE, e16x, marcolnx are not possible

My dear have you tried the generic firmware which I suggested....? well I know you have flashed to E track firmware but I think you can flash C2 track firmware. well I really don't know what are you doing with your phone

Kindly post your phones current firmware version that will really help in solving problem

just go to dialing screen and type WWW008W to get the version and post here exactly what is shown