Good news for all bricked user (simple recovery), Kundan our undo BP part is solved here

[s.rana71]

Any one who have faced any of following problems can get rid of it:
After flashing your

1. Internet Connection is not working (Its connecting but unable to surf)
2. Your home GNB (Menu,contact,Message,Calls) keys are not working
3. Invalid battery is shown (Warning if BT50 battery is shown invalid after flash then only use it )


Just download the attached file and flash with rsd lite

HAPPY NEWS :
You will even be able to use EDGE after it

NOTE:Hey to extract file just remove .zip extension and put both parts in one folder and extract with winrar

Also if after flashing the phone freezes at the "M" logo screen or boot screen then flash with AP part of any f/w

[kundancool]

what do you mean ?

Really great but not hacker......

Where is the attchment

hope you are right otherwise ......

this will make your value down for me.....

POST THE ATTACHMENT AS SOON AS POSSIBLE....

[s.rana71]

just uploading as the uploaded files got accidently deleted
so again doing the same
hope you can wait
and, the solution is 100% correct as you must have remembered we both had same problem and hope it will work for you also.

[shantanu]

hmmm dude where is the link

[s.rana71]

link updated in 1st post

[kundancool]

@s.rana71

I don't know it is correct to say or not but

DON'T BE SO CONFIDENT THAT YOU ARE A HACKER AND YOU HAVE THE REPUTATION

What I did.
========
1.Downloaded the two attached files from First post
2.Extracted both in my folder.
3.Flashed the phone using RSD lite4.5.5 .
4.After the phone booted (BOOOOOOM)

What the hell my phone got bricked again................Life became HELL

now what i have to again do BP flashing to repair my phone but this time i was really in trouble

I wasted my five hours of continuous work time to repair my Ming I tried every firmware to repair my phone i have a stock of 30 firmware I tried almost 15 still no success

then i tried flashing the blank firmware and then flashed to generic firmware then

I tried BP flashing from Muromec WOOOOOW
it worked my phone was back again

really hell time just because of you......

I don't know why you posted this

I think it worked for you because of some reasons but it dosn't for me and i hate BP flashing

AND I CAN NOT DISABLE THE EDGE SO I CAN NOT ACCESS GPRS ALSO HELL CONTINUES................ FOR ME

I am still searching for solution for my two problems Charging and EDGE

[s.rana71]

tell me if your ming freezed at boot screen or something else happened please explain

[kundancool]

tell me if your ming freezed at boot screen or something else happened please explain

no my phone did not booted itself and flashing process was not showed that it was completed actually

I flashed it showed two times 100% then again stuck at 0% for 15 minutes i disconnected then phone and booted using power button and BOOM bricked phone once again

Please guide in brief if I did something wrong .......

While can you tell me what is the version of this BP and what are the changes you made to make a repair image

while how you created this firmware it shows Signed production firmware in RSD I want to know

well Thanks for your HELP!

Hope I will solve this problem with your help

[s.rana71]

hey men i think your phone was not re-enumerated correctly

please observe 1st 100% is for creating image file and 2nd for loading ram downloader

You should try again and see if the sounds of disconnect and connect came out of your pc speakers after the message waiting for re-enumeration

if not in first try then please take out usb cable and insert again manually after the message

[kundancool]

I really hate you........

Reason
Before flashing to your repair Image
Condition of my phone
==================
100% OK only GPRS problem can't access EDGE

After flashing to your repair Image
============================
I can not use my camera it is not working any more
I have to flash using test point to repair my phone after i flashed the repair image

my lcd backlight is not working i managed some how to make it work but now i am in hell

I wish you would not have posted this at least I could have been using my camera and everything without any problem

but full problem with my phone....

Now I can not access GPRS too.............